Container office, kitchen, toilet and shower 6.00 x 2.43 m

Frame construction:

Professionally welded steel construction made of hollow and rolled sections (3 mm thickness S235), self-supporting, primed and painted with polyurethane paint in RAL 7016 or according to customer requirements; 8-part container corners.

Floor construction:

Corner floor: 0.5 mm T14 trapezoidal sheet metal, riveted to the floor beams

Insulation: 100 mm mineral wool, 0.2 mm vapor barrier

Floor plate: OSB panels, screwed onto profiled steel beams

Floor covering: 2 mm PVC with skirting board, fully glued, marbled gray. Permissible floor load: 3.8 kN/m²

Wall construction:

Profiled sheet metal: 0.5 mm T8 trapezoidal sheet metal in RAL 7016 (anthracite) – other colors available on request at an extra charge.

Insulation: Mineral wool 50 mm, up to 100 mm according to customer requirements

Internal cladding: 16 mm laminate panel, white. Vapor barrier: 0.2 mm – membrane

Roof construction:

Profiled sheet metal: Trapezoidal sheet metal 0.7 mm T35

Insulation: 100 mm mineral wool

Internal cladding: 16 mm laminate panel, white. Vapor barrier: 0.2 mm – membrane

Water drainage: Water drainage via PVC pipes in the container corners

Windows:

1 plastic window 2 m x 1.2 m with insulating glazing, tilt-and-turn fittings and plastic roller shutters

Door:

External door: Hörmann single door ZKI60, RAL 7016

Dimensions: 900 x 1970 mm

Bathroom: hot water boiler, toilet, shower and sink

Electrical installation: VDE-DE standard

CEE 380 V/32 A/5-pin external sockets. Lighting: 2 x 50 W LED lamps, controlled by an on/off switch, sockets, a distribution box with the appropriate number of fuses and residual current devices. The electrical installation is concealed.

We can install additional windows at short notice.

We can also produce them at any time according to your specifications in other dimensions and colors or for toilets or other installations.